New Shrink Fit Heat Machine For Shrink Fit Tool Holder
| Power | 6000w/60Hz | VOLTAGE V INPUT | 220V 1 phrase |
| HEATING TIME | 5-12 seconds | AIR COOLING TIME | 80 seconds |
| HEIGHT | 300MM | HEATING RANGE | 2-40MM |
NOTE: Before using the shrink fit tool holder, please confirm your shank is H6
Shipping by UPS
Return not acceptable unless item defective in manufacture
SHRINK FIT CHUCK IS AVAILABLE
| MODEL | Hole Diameter | D | GAGE LENGTH | TIR | ORDER NO |
| CAT40 | 1/8,3/8,1/4,1/2,3/4,1″ | 1.3″ | 3.0,4.0,6.0,8.0 | <0.0001″ | ICS-C01 |
| CAT50 | 1/8,3/8,1/4,1/2,3/4,1″,1.25″ | 1.5″ | 3.0,4.0,6.0,8.0 | <0.0001″ | ICS-C02 |
| BT30 | 3,4,5,6,8,10,12mm 1/8,1/4,1/2 | 1.4″ | 3.0,4.0,6.0 | <0.0001″ | ICS-B01 |
| BT40 | 3,4,5,6,8,10,12,16mm 1/8,1/4,1/2 | 1.5″ | 3.0,4.0,6.0,8.0 | <0.0001″ | ICS-B02 |
| BT50 | 3,4,5,6,8,10,12,16mm 1/8,1/4,1/2 | 1.5″ | 3.0,4.0,6.0,8.0 | <0.0001″ | ICS-B03 |
| HSK63A | 3,4,5,6,8,10,12,16mm 1/8,1/4,1/2 | 1.5″ | 3.0,4.0,6.0,8.0 | <0.0001″ | ICS-H01 |
| HSK63F | 3,4,5,6,8,10,12,16mm 1/8,1/4,1/2 | 1.5″ | 3.0,4.0,6.0,8.0 | <0.0001″ | ICS-H02 |
| ISO30 | 3,4,5,6,8,10,12,16mm 1/8,1/4,1/2 | 2″ | 3.0,4.0,6.0 | <0.0001″ | ICS-I01 |
| ISO20 | 3,4,5,6, 1/8,1/4, | 2″ | 2.0,3.0,4.0 | <0.0001″ | ICS-I02 |
| HSK25E | 3,4,5,6, 1/8,1/4, | 2.2″ | 2.0,3.0,4.0 | <0.0001″ | ICS-H03 |
| HSK30E | 3,4,5,6, 1/8,1/4, | 2.2″ | 2.0,3.0,4.0 | <0.0001″ | ICS-H04 |